Applications

EC Axial Fans

Hidria manufacture high performance AC and EC (electronic commutation) axial fans with external rotors, distinguished by their low noise and high energy efficiency. The latter far exceed limit values laid down for energy efficiency by the European energy efficiency directive, ErP 2015. The continual introduction of innovative design solutions and new production technologies assures the high quality of their products. As an innovative manufacturer, in 2014, Hidria successfully developed a new generation of EC axial fans (HEC), combining high level design with advanced fan operating functionality, culminating in their product design solution being awarded the Red Dot award for Product Design 2014.

EC Axial Fans offer high efficiency throughout the entire speed range. Speed setting is available via analogue input 0-10v, 4-20mA and PWM Signal, or digital input via MODBUS RTU. All adjustments can be made with software or factory pre-set. Customisation to the required specification is possible; e.g. fan colour, lead wire length, provision of grill or wall plate, etc. All Hidria EC motor fans are ErP 2015 compliant.

 

AC & DC Axial Fans

  • Ø300mm

    • Stamped Metal Blades
    • Single Phase
    • Nominal Voltage Range: 230VAC, 50/60Hz
    • Input Power: 80W
    • Speed: 1650 RPM
    • Protection Class: IP44
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130
     
  • Ø315mm

    • Stamped Metal Blades
    • Single Phase
    • Nominal Voltage Range: 230VAC, 50/60Hz
    • Input Power: 120W
    • Speed: 1650 RPM
    • Protection Class: IP44
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130
     
  • Ø330mm

    • Stamped Metal Blades
    • Single Phase
    • Nominal Voltage Range: 230VAC, 50/60Hz
    • Input Power: 120W
    • Speed: 1550 RPM
    • Protection Class: IP44
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130
     
  • Ø350mm

    • Stamped Metal Blades
    • Single Phase
    • Nominal Voltage Range: 230VAC, 50/60Hz
    • Input Power: 125W
    • Speed: 1400 RPM
    • Protection Class: IP44
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130
     
  • Ø400mm

    • Composite PA30GF Blades
    • Single Phase
    • Nominal Voltage Range: 200~240VAC, 50/60Hz
    • Input Power: 320W
    • Speed: 1520 RPM
    • Protection Class: IP54
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130
     
  • Ø450mm

    • Composite PA30GF Blades
    • Single Phase
    • Nominal Voltage Range: 230VAC & 230-240VAC, 50/60Hz
    • Input Power: 220 & 300W
    • Speed: 1150 & 1280 RPM
    • Protection Class: IP44
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130
     
  • Ø500mm

    • Composite PA30GF Blades
    • Single Phase
    • Nominal Voltage Range: 230~240VAC, 50/60Hz
    • Input Power: 120 & 300W
    • Speed: 800 & 1100 RPM
    • Protection Class: IP54
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130
     
  • Ø500mm

    • Composite PP40GF Blades
    • Single & 3 Phase
    • Nominal Voltage Range: 200~277VAC & 380-480VAC, 50/60Hz
    • Input Power: 650 & 980W
    • Speed: 1420 & 1600RPM
    • Protection Class: IP54
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130
     
  • Ø560mm

    • Composite PA30GF Blades
    • Single Phase
    • Nominal Voltage Range: 200~240VAC, 50/60Hz
    • Input Power: 240W
    • Speed: 950 RPM
    • Protection Class: IP54
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130
     
  • Ø560mm

    • Composite PP40GF Blades
    • Single Phase
    • Nominal Voltage Range: 200~277VAC & 380-480VAC, 50/60Hz
    • Input Power: 600W
    • Speed: 1150 RPM
    • Protection Class: IP54
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130
     
  • Ø630mm

    • Composite PA30GF Blades
    • Single Phase
    • Nominal Voltage Range: 230~240VAC, 50/60Hz
    • Input Power: 250W
    • Speed: 770 RPM
    • Protection Class: IP54
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130
     
  • Ø630mm

    • Composite PP40GF Blades
    • Single & 3 Phase
    • Nominal Voltage Range: 200~277VAC & 380-480VAC, 50/60Hz
    • Input Power: 620 & 900W
    • Speed: 980 & 1100 RPM
    • Protection Class: IP54
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130
     
  • Ø710mm

    • Composite PP40GF Blades
    • Single & 3 Phase
    • Nominal Voltage Range: 200~277VAC & 380-480VAC, 50/60Hz
    • Input Power: 670 & 930W
    • Speed: 820 & 900RPM
    • Protection Class: IP54
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130
     
  • Ø800mm

    • Composite PP40GF Blades
    • Single & 3 Phase
    • Nominal Voltage Range: 200~277VAC & 380-480VAC, 50/60Hz
    • Input Power: 720 & 810W
    • Speed: 710 & 735RPM
    • Protection Class: IP54
    • Direction of airflow: Sucking or blowing
    • Working ambient temperature between -25°C and +65°C
    • Insulation Class: 130